Robin America EK13 Скачать руководство пользователя страница 78

Страница: 78 / 80

17-5 INSPECTION AND MAINTENANCE EVERY 300 HOURS

MAINTENACE ITEMS

REASON / REMARKS

(1) Inspect the intake and exhaust valve clearance.

Adjust if necessary.

(1) Incorrect clearance can cause low power output

and engine malfunction.

17-6 INSPECTION AND MAINTENANCE EVERY 500 TO 600 HOURS (EVERY 6 MONTHS)

MAINTENACE ITEMS

REASON / REMARKS

(1) Remove the cylinder head and remove any

carbon.

(2) Disassemble and clean the carburetor.

(3) Inspect and fitting the intake and exhaust valve

and the seats of them.

(1) Carbon deposits can cause engine malfunction.

(2) A faulty carburetor can cause engine malfunction.

(3) Unfitting can cause low power output and engine

malfunction.

17-7 MAINTENANCE EVERY 1,000 HOURS (ANNUAL MAINTENANCE)

MAINTENACE ITEMS

REASON / REMARKS

(1) Overhaul the engine. Clean and correct the

engine parts, replacing if necessary.

(2) Replace the piston rings.

(3) Replace the fuel hose.

(1) Dirty, misaligned or worn parts can cause low

power output and engine malfunction.

(2) Faulty piston rings can cause low output power

and engine malfunction.

(3) To prevent fuel leakage and attendant dangers.

17-8 SPARK ARRESTER AND TAIL SCREEN (OPTION)

Check and clean the spark arrester and the tail screen, which are mounted on the tail of the exhaust
muffler every 100 hours.

Clogged the spark arrester or the tail screen can cause prevents the flow of exhaust gas, reduces
engine output, increases fuel consumption and makes starting difficult.

HOW TO REMOVE THE SPARK ARRESTER AND TAIL SCREEN

(1) Remove the tapping screw, the spark arrester (screw: 1pc.) and the tail screen (screw : 3ps. ).

CLEAN THE SPARK ARRESTER AND TAIL SCREEN

(1) Use a brush to remove carbon deposits from the spark

arrester screen. Be careful to avoid damaging the screen.

(2) The spark arrester must be free of breaks and holes.

Replace the spark arrester if it is damaged.

(3) Install the spark arrester, and muffler protector in the

reverse order of disassembly.

CAUTION

If the engine has been running, the muffler, the spark arrester and the tail screen will be very hot.

Allow the muffler to cool before checking or cleaning the spark arrester and the tail screen.

Содержание EK13

















































































Результаты поиска

Содержание EK13

Отзывы:

Похожие инструкции для EK13

Бренды по названию

Популярные бренды

Robin America EK13, Руководство по обслуживанию

Результаты поиска

Содержание EK13

Отзывы:

Похожие инструкции для EK13

Бренды по названию

Популярные бренды