Robin America EH72, Руководство по обслуживанию

Страница: 40 / 74

14) STARTER MOTOR
Install starter motor.
Tightening torque
16.7 - 18.6 N ・ m
(170 - 190 kgf ・ cm)
(12.3 - 13.7 ft ・ lb.)
– 36 –
11) BREATHER PIPE and COVER
Attach breather plate (breather valve) and
breather cover to crankcase using proper
gaskets.
Put breather plate in such position as its reed
valve opens outside.
Tightening torque
2.9 - 4.9 N ・ m
(30 - 50 kgf ・ cm)
(2.2 - 3.6 ft ・ lb.)
GASKET , breather plate
BREATHER PLATE
GASKET , breather plate
BREATHER COVER
M6 FLANGE
BOLT : 2 pcs.
Fig. 5-41
12) SPARK PLUG
Install spark plug to each cylinder head.
Spark plug : NGK - BPR6ES
Tightening torque
New plug
13) CHARGE COIL
Install charge coil with the wiring located
at 2-o’clock position.
Tightening torque
1.5 - 3.4 N ・ m
(15 - 35 kgf ・ cm)
(1.1 - 2.5 ft ・ lb.)
CHARGE COIL
ELECTRIC
STARTER
PULLING
M8 FLANGE
BOLT : 2 pcs.
Fig. 5-42
NOTE
;;
Never tighten the bolts over the specified
torque, or gasket is damaged and cut.
Replace gaskets with new ones if they
are torn or damaged.
Current plug
15) CYLINDER BAFFLE
Attach cylinder baffle #1, #2, #3 and #4.
11.8 - 14.7 N ・ m
(120 - 150 kgf ・ cm)
(8.7 - 10.8 ft ・ lb.)
22.5 - 26.5 N ・ m
(230 - 270 kgf ・ cm)
(16.6 - 19.5 ft ・ lb.)