If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
34
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press the
On / Off
button to switch on the radio and ensure your radio
is in DAB or FM mode.
2. Press and hold the
Advanced / Info
button.
3. Rotate
the
Tuning / Select
control until
'FACTORY'
appears on the
display. Press and release the
Tuning / Select
control so that the
display shows
'RESET'
and then press the
Tuning / Select
control
again.
4. A full reset will be performed. The station list and presets will be
erased. Alarms will be cancelled and sleep timer settings will be set
to their default values. The display will show
'ROBERTS'
and after a
short time the current time will appear on the display.
5. See "Operating your radio" on page 8 for further details.
In case of malfunction due to electrostatic discharge, reset the product
as above to resume normal operation. If you are not able to perform the
reset operation as above, removal and reconnection of the power supply
and batteries may be required.
If a problem persists our technical staff would be pleased to offer any
assistance on operating the radio. Our technical helpline number is
020 8758 0338.
3
2
