13
Operating your radio - Search tuning FM
1. Fully extend the wire aerial.
2. Press the
Standby button
[On/Off..button.on.the.remote.control].
to
switch on your radio.
3. Press and release the
Function button
until the FM band is se-
lected.
4. Press the
Skip Up button
and then press the
Auto scan button
,
your radio will scan in an upwards direction (low frequency to high
frequency) and stop automatically when it finds a station of sufficient
strength.
5. After a few seconds the display will update. If the FM band is selected
the display will show the station name if available. The display will
also show "St" and "RDS" after the station name on the upper line if
the station is with stereo and RDS function.
6. To find other stations press and hold the
Autoscan button
as before.
7. To scan the FM band in a downwards direction (high frequency to low fre
-
quency) press the
Skip Down button
and then press
Auto scan button.
8. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
9. Adjust the
Volume
to the required settings.
10. To switch off your radio press the
Standby button
.
2
3
4
7
9
10
4,6,7
