7
Operating your radio - DAB
1. Fully extend the wire aerial.
2. If your clock radio is in standby mode, press the
Standby button
[On/off.on.the.remote.control]
to switch on your clock radio.
3. Press and release the
Function button
to select DAB. The display
will show "DAB" and then " Now tuning" for a few seconds.
4. If this is the first time the clock radio is used a quick scan of UK Band
III DAB channels will be carried out. If the clock radio has been used
before the last used station will be selected.
5. During autotune as new stations are detected the station counter on
the right hand side of the display will increase and stations will be
added to the list. The display will show the station name in the first
line of the display and other information in the second line.
6. When the Auto tune is complete the first station (in numeric-alpha
order 0...9...A....Z) will be selected.
7. If the station list is still empty after the Autotune your radio will display
"Station not available".
8. If no signals are found it may be necessary to relocate your radio to
a position giving better reception.
2
3
