24
Dimmer Curve
- You can select desired dimmer curve: Linear or Square Law.
Temperature unit
- Use the menu item to change temperature unit from °C to °F.
Fan Mode
- Use the menu to set the fixture fans to max. fan power mode ("
High
") or to the auto-control mode
("
Auto
"). The third mode ("
Quiet
") allows to set desired noise of the fans and the adjusted noise level is kept
during fixture operation. The "
Fan Noise Leve
l" menu serves for adjusting fans power from min. to max.
To switch the fixture to the "Quiet" mode can be also realized by DMX value from range of 241-255 on the
"power/Special functions" channel.
Note: the light output at min. level of the fan noise is reduced.
Date & Time Settings
- Use this menu to set current date and time for the fixture log system (menu "
View
Logs
"). Set this menu item before first fixture operation.
Default Settings
- The menu item allows to set all fixture parameters to the default (factory) values.
Password Protection
- if the item is on, a password is required to enter the fixture menu. The password cannot
be changed. The password prevents unauthorized person from changing setting of the fixture.
7.4 Tab "Manual Control"
Reset Functions
- The menu allows to reset the fixture either per function modules or all modules together.
Total System Reset
- The item resets all function modules.
Pan, Tilt Reset
- The item resets a pan and tilt movement.
Colour System Reset
- The item resets colour wheel and CMY wheels.
Iris, Gobo System Reset
- The item resets a static/rotating gobo wheel.
Optics/Prism/Frost Res.
- The item resets a zoom, focus, prism and a frost module.
Manual Effect control
-
Use the menu to control all fixture channels by means of the control panel.
7.5 Tab "Stand-alone"
Test Sequences
-
Use the menu to run a test/demo sequences without an external controller, which will show
you some possibilities of using Robin SilverScan.
Dynamic Mode
- This mode uses all Robin SilverScan functions including pan/tilt movement and therefore
is good for a complete introduction of the fixture.
Static Mode
- This mode is suitable for projections on the wall, ceiling or ground without any pan/tilt move
-
ment. Adjust the pan, tilt, zoom, focus and hot-spot to desired positions an start test sequences by touching
the green icon.
Music Trigger
- Use the item to activate the sound control of the running program via the built-in microphone.
Preset Playback
- This menu allows you to select the program which will be played in a loop after switching
the fixture on (the option is commonly used in a stand-alone operation without an external controller).
None
- The option disables “Presetting playback” function.
Test
- The option starts the test sequences.
Prog. 1
- The option starts user program No. 1.
Prog. 2
- The option starts user program No. 2.
Prog. 3
- The option starts user program No. 3.
Play program
- Use the menu to run desired program in a loop.
Play Program 1
- The option starts user program No.1.
Play Program 2
- The option starts user program No. 2.
Play Program 3
- The option starts user program No. 3.
Содержание ROBIN SilverScan
Страница 1: ...1 Version 1 4 ...
