manualshive.com logo in svg

Robe Image Spot 250 AT, Руководство пользователя

Поделиться
Скачать
Robe Image Spot 250 AT Скачать руководство пользователя страница 3

3

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOU INITIAL START - UP!

1. Introduction

Thank you for having chosen a IMAGE SPOT 250 AT. You acquired a versatile, powerful and intelligent lighting-
effect.

Unpack your IMAGE SPOT 250 AT and make sure that there are no damages caused by transportation. Should
there be any, please consult your local dealer and do not take the device into operation.

Features

• Master/slave operation •Build-in test program •  Built-in light sensor and built-in clock for  stand-alone operation
• Remote control

 

• 3 freely-programmable  programs, each up to 99 steps  • Rotating gobo-wheel  with 5 gobo

positions and open • The rotating gobos are indexable • The rotating gobos can be interchanged • Remotely
controllable motorized focus • Combined shutter/dimmer unit allowing very smooth dimming and strobo effect
max. flash per sec. • Modular construction of fixture • Addressing, special functions setting, effects calibration via
control panel • Readout fixture/lamp usage and lamp strike 

 

•  Receiving DMX values, temperature, etc • Built-in

analyzer for easy fault finding, error messages • Remotely switching of the lamp • Black-out while Head moving or
gobo changing

 

• Remotely controllable speed of Pan/Tilt movement for easy programming • Remote reset function

• Intelligent control panel with 4-digit LED display • Silent fans cooling; • 10 DMX-channels - 16 bit Pan/Tilt
movement resolution • 8 DMX-channels - 8 bit Pan/Tilt movement resolution • Pan-movement range 530° • Tilt-
movement range 280° •Automatic Pan/Tilt position correction • High luminous-efficiency parabolic mirror and
double condenser system •15°  objective • Motorized focus controllable via DMX • All lenses are anti-reflection
coated • 5 high-quality stepper-motors for smooth movements • Self-resetable thermo-fuse • For MSD 250/2 GY-
9,5 lamp • DMX-control via every standard DMX-controller •

Содержание Image Spot 250 AT







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды