Robe DMX Control 1024 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 26

background image

4

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOU INITIAL START - UP!

SAFETY INSTRUCTIONS

Every person involved with installation and maintenance of this device have to:
- be qualilfied
- follow the instructions of this manual

CAUTION!

Be careful with your operations. With a high voltage you can suffer

a dangerous electric shock when touching the wires!

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure
a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written
in this manual.

Important:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual
or any unauthorized modification to the device.

Please consider that damages caused by manual modifications to the device are not subject to warranty.

Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the
mains with particular caution!

The power plug has to be accessable after installing the device.

Make sure that the power cord is never crimped or damaged by sharp edges. Check the device and the powercord
from time to time.

Always disconnect from the mains, when the device is not in use or before cleaning it.

The electric connection, repairs and servicing must be carried out by a qualified employee.

OPERATING DETERMINATIONS

This device was designed for indoor use only.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your device. Leave the device switched off until it has
reached room temperature.

Do not shake the device. Avoid brute force when installing or operating the device.

When choosing the installation-spot, please make sure that the device is not exposed to extreme heat, moisture
or dust. There should not be any cables lying around. You endanger your own and the safety of others!

Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!

Please use the original packaging if the device is to be transported.

«
...
2
3
4
5
6
...
»

Содержание DMX Control 1024



























Отзывы:

Нет отзывов

Похожие инструкции для DMX Control 1024

Бренд: J4C Страницы: 4

Бренд: ABB Страницы: 6

Бренд: Balboa Страницы: 12

Бренд: Paoli Страницы: 16

Бренд: Jeep Страницы: 32

Бренд: Accel Страницы: 8

Бренд: Taie Страницы: 28

Бренд: IFM Страницы: 49

Бренд: MacDon Страницы: 32

Бренд: K&K Страницы: 6

Бренд: IBM Страницы: 38

Бренд: Daihan Scientific Страницы: 11

Бренд: knorr-baby Страницы: 44

Бренд: ICP DAS USA Страницы: 6

Бренд: Barco Страницы: 4

BLEUBOX R-IN-UHF-5239U

Бренд: iDTRONIC Страницы: 13

Бренд: Konig Страницы: 8

Бренд: Eaton Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды