Robe 1200 Color Spot Скачать руководство пользователя

Страница: 38 / 39

There are no serviceable parts inside the device except for the lamp and the main fuse.

For replacing lamp,please refer to the instructions under „Fitting/Exchanging the lamp”.

Replacing the fuse

If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of the same type

and rating.

Before replacing the fuse, unplug mains lead.

Procedure:

1) Unscrew the fuseholder on the rear panel of the base with a fitting screwdriver from the housing (anti-clockwise).

2) Remove the old fuse from the fuseholder.

3) Install the new fuse in the fuseholder.

4) Replace the fuseholder in the housing and fix it.

More complicated maintenance and service operations are only to be carried out by authorized dealers.

grid

air filter

Velcro fastener

Specifications are subject to change without notice.

Содержание 1200 Color Spot








































Результаты поиска

Содержание 1200 Color Spot

Отзывы:

Похожие инструкции для 1200 Color Spot

Бренды по названию

Популярные бренды

Robe 1200 Color Spot, Руководство пользователя

Результаты поиска

Содержание 1200 Color Spot

Отзывы:

Похожие инструкции для 1200 Color Spot

Бренды по названию

Популярные бренды