Robe 1200 Color Spot, Руководство пользователя

Страница: 30 / 39

30 31
Dimmer Curve - Select desired dimmer running.
Curve 1 Curve 2
CMY-CTF Speed - Select this option to select desired speed of movement of CMY and CTF lamelas:Standard speed or
High speed.Default setting is High Speed.
Focus/Zoom Curve - Compatible - The behaviour of focus/zoom module is compatible with previous versions of
the Colorspot 1200 AT/1200E AT.
New - Increases possibilities of focus/zoom module.
Temperature Unit --- Select this menu in order to display fixture temperatures in °C or °F.
Default Settings
- Select this option to reset all fixture personalities to the default values.
9.4 Lamp On/Off
Use this option in order to switch on/off the lamp. It is also important to note, that the lamp is cold restrike type, that means,
that it has to be cold before striking.
9.5 Test sequences
Use this menu to to run a special demo-test sequences without an external controller, which will show you some pos-
sibilities of using ColorSpot 1200 AT.
Mode 1
- This mode is suitable for projections on the wall, ceiling or ground without any head movement.
Mode 2
- This mode uses all ColorSpot 1200 AT functions including pan/tilt movement and therefore is good for
a complete introduction of the fixture.
9.6 Manual mode
Presetted Effects -
Select this menu to call up presetted positions of channel effects.
Manual Effect control - Select this menu to control channels by control elements on the control board.
9.7 Stand-alone setting
Use this menu to set options for stand-alone mode as a selection of the playing program,programming and modifying
current programs.
Music Trigger - Select this function to enable the sound control of the running programs via the built-in microphone.
Presetting Playback - This function allows you to select the program which will be played in the
stand-alone mode after switching the fixture on.Selected program will be played continuously in a loop.
Disabled
- The option disables „Presetting playback” function.
Test Program - The option will start built-in test program.
Program 1 - The option will start created program No.1
Program 2 - The option will start created program No. 2
Program 3
- The option will start created program No. 3
Note:
If the fixture operates in the controller mode (DMX controller is connected) and any program from this menu is
selected, in this case the fixture will not respond to the DMX controller after switching on and will play selected program.
Playing program
-Select this menu to run a built-in program or the 3 freely-programmable programs in a loop.
Test Program In Loop
- The option starts built-in test program.
Program 1 In Loop - The option starts created program No. 1
Program 2 In Loop - The option starts created program No. 2
Program 3 In Loop
- The option starts created program No. 3
Select the program you wish and press [ENTER]. The selected program starts running. By Pressing [ENTER] again is
possible to pause the program running.
Editing Program
- Select this menu to edit or create the program. The ColorSpot 1200 AT has one built-in program and
the 3 free programs, each up to 99 steps. Each program step has a step time.
Step time-the time, during which effects last in the current step.
Procedure:
1. Select the program you want to edit („Program 1” - „Program 3”) and press [ENTER].
2. Select „Edit Steps” menu and press [ENTER].
3. Select the desired program step („Step 01” - „Step 99”) and press [ENTER].
4 Select the desired item and press [ENTER]. Now you can edit DMX value for selected item:
"Pan"
- a coarse pan, value 0-255