ENGLISH
4
INSTRUCTIONS AND USER MANUAL
Content
Page
01
Model designation and order number
02
Safety instructions: general / controller / model operation
03
Safety instructions: Batteries / Flight instructions / Warranty /
Disclaimer / Insurance / CE / Disposal
04
Technical data
05
Explanation of technical terms
06
Scope of delivery
07
Assembly of the tail unit
08
Assembly of the tail unit/adjustment of the linkage rods
09
Wing assembly
10
Mounting the Wing
11
OPTIONAL: Retrofitting with flaps
12
OPTIONAL: Retrofitting with flaps
13
Mounting the canopy and inserting the flight battery
14
Center of Gravity and rudder deflections
15
Flight preparations and important procedures before take-off
16
The first flights, flying in
17
Spare parts
18
Technical data controller/programmable settings
19
Using the Electronic Speed Controller (ESC)
20
Programming the controller with the transmitter (4 steps)
21
Instructions for the LED connection for Night version
22
Instructions for the LED connection for Night version
23
Your notes
24
Sales and service note
General instructions for the construction process:
Due to the high degree of prefabrication, the model can be assembled ready to fly in
just a few steps.
In order to facilitate safe operation of this model, it is essential that you read these
instructions carefully before using it for the first time.
All servos with linkage rods, the brushless controller and the brushless motor are pre-
assembled.
We are constantly striving to adapt our products to the latest developments. Please
inform yourself about technical improvements, updates and updates of the
documentation in the internet under the respective product description on our
homepage www.robbe.com
Technical data:
Lenght:
approx. 1.190 mm
Wingspan:
approx. 1.840 mm
Take-Off weight:
approx. 850g
Motor:
Brushless-Outrunner 28x30 1.100KV
ESC:
Brushless-ESC 20A 2-3s
Radio:
4 channel
RC-Funktions
Ailerons, rudder, elevator, motor, flaps (optional)
Recommended accessories:
•
4-channel computer radio with receiver
•
No. 6532 LiPo-battery robbe RO-POWER EVO V5 11,1V 3s1300/25(50)C
•
Suitable charger
Optional accessories
No. 264901 Upgradekit flaps
(linkages without servos) Arcus II
Required tools, aids and materials:
Screwdriver
Velcro stripe
Direction indications such as "right" are seen in the flight direction.
Repairs:
For repairs only use adhesives suitable for the material. Observe the safety and processing
instructions of the adhesive manufacturer.
RC-Installation
For the correct connection of the RC components, as well as the programming of
corresponding mixers and other settings, it is essential to observe the connection diagram
and the operating instructions of the remote control system manufacturer.
Depending on the selection of the remote control system, a V-cable may be required to
connect the ailerons.
