Roadtrek SS AGILE 2020, Руководство пользователя

Страница: 23 / 66

Roadtrek Inc.
23
Twin Beds
You create two twin beds by lowering the sofa. (Picture 23.1) The sofa makes a continuous sleeping
surface with the two bench seats, leaving the center aisle clear.
Make sure that there are no obstructions in the travel path both above and below the sofa.
Do not ride the sofa while it is moving
King Bed
You create the king bed by lowering the sofa as above, then adding the center section. (Picture 23.2)
•
Locate the panel under the bench cushions on the passenger’s side and slide it out into the
open space between the two side bench seats. Secure it into the notches on the inner
surface of both bench seat bases.
• Reposition the bottom cushions of the side bench seats over this panel so they are side by side.
• Place the long thin vertical bench seat cushions in the empty space between the wall and the
larger bench seat cushions.
When you raise the sofa put the seat belts back in position. To do this, open the back door of
the vehicle and push the seatbelts through the sofa between the seat and back cushions.
NEVER use the rear seats for passengers without seatbelts.
Always put the seatbelts back when you raise the sofa. To do this, open the back door of the
vehicle and push the seatbelts through the sofa between the seat and back cushions.
NEVER use the rear seats for passengers without seatbelts.
King bed
Twin Beds
Picture 23.1
Picture 23.2