![Roadstar CD-240MPR/512 Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/roadstar/cd-240mpr-512/cd-240mpr-512_instruction-book_1467944009.webp)
CD240MPR/512
9
Fitting the DIN mounting sleeve
DIN front-mounting
This unit can be properly installed using the DIN front-mounting method.
Do not connect the unit to any wiring at this stage.
The fixing hardware supplied is for the front mounting method. This
method also uses a stabilising strap that fits on a threaded stud fitted to
the rear face of the unit for connection to a suitable structure behind the
dashboard.
Fitting the sleeve
1. First remove the front panel from the unit. See page 9.
2. Remove the two transit screws from the unit.
3. Insert the two release keys into the
groove on each side of the unit until
they click, then slide the sleeve off
the unit in the direction as shown.
4. Insert the sleeve into the aperture
provided in the dashboard where
the unit is to be fitted. See below.
5. Bend a sufficient number of the
tabs in the sleeve towards the outer
so that they hold the sleeve
securely to the dashboard.
NOTE:
Ensure that you remove the two transit screws before
attempting to install the unit. These are on the top panel and
screw through two red coloured labels attached to the unit