CD240MPR/512
16
Using the Radio
Band selection
In the radio mode:
Press the
BAND
button to select the desired band.
As you press the button the bands will be stepped through and
displayed on the screen in the following cyclic order: ->FM1 -> FM2 ->
FM3 -> MW1 -> MW2 ->
Station selection auto tune
Press and hold the
TRACK/TUNE
buttons for about a second to
activate the automatic station seek function.
The display shows the selected band with the frequency changing while
it scans for a station. When one is found the display shows in turn the
frequency tuned to and the station name and continues to display the
name.
Station scan auto tune
The
SCN
function scans the band until a station is found. The station is
then played for about 3 seconds before the scan continues.
Press the
SCN
button to activate station scan. Press again to cancel the
scan function.
Station selection manual tune
Briefly press the
TRACK/TUNE
buttons to step up or down the
frequency band from the current position until you reach the required
frequency or hear a station you like.
Auto program seek and store
The
AS/PS
function scans and stores the six strongest stations found.
The stored stations are recalled by pressing the
preset buttons (1 to
6)
on the front panel. Select the BAND first.
Press and hold the
AS/PS
button for several seconds. The stations
found with the highest signal strengths are stored in the six preset
memory locations.
