CD240MPR/512
7
Installation
Recommendations
• Choose the mounting location where the unit will not interfere with
the normal driving function of the driver.
• Before finally installing the unit, connect the wiring temporarily and
make sure it is all connected up properly and the unit and the
system work properly.
• Use only the parts included with the unit to ensure proper
installation. The use of unauthorized parts can cause malfunctions.
• Consult with your nearest dealer if installation requires the drilling of
holes or other modifications of the vehicle.
• Install the unit where it does not get in the driver’s way and cannot
injure the passenger if there is a sudden stop, like an emergency
stop.
• If the installation angle exceeds 20 degrees from the horizontal, the
unit may not give its optimum performance.
• Avoid installing the unit where it would be subject to high
temperature, such as from direct sunlight, or from hot air, from the
heater, or where it would be subject to dust, dirt or excessive
vibration.
ISO connector
Nowadays cars are fitted with an ISO connector that is ready-wired to
all speakers and power leads within the car.
This unit is fitted with an ISO connector plug that will mate with the car-
fitted ISO connector socket thereby providing a very simple wiring
installation. See page 8.
NOTE:
Some older cars will not have an ISO connector. In these
cases you will need to obtain a “patch cable assembly” that
connects to the connector that is fitted. The other end of this
cable has an ISO connector to mate with that from this unit.
