CD240MPR/512
17
The radio will scan continuously, then cycle through the stations found
and play each for a brief period
During the scan press
AS/PS
to stop and play the currently displayed
station.
Program scanning
Press
AS/PS
button briefly to scan the preset stations.
When the field strength level is above a preset threshold the radio plays
the preset station for a short time before resuming its scan. At any time
press
AS/PS
again to halt the scan and play the station displayed at the
time.
Station storing
There are six preset buttons (1 to 6) to store your favourite stations.
To store the currently playing station at preset number 1:
Press and hold
1 PAU
button for several seconds until a beep sounds.
The current station is stored at preset number 1.
Radio functions
Press and hold the
SEL
button for several seconds. Each press of this
button will step through the available functions.
Use the
VOL +/-
button to adjust the function
When the required function is displayed this will be set after a few
seconds, the display then returns to the current mode of operation.
These are the available functions (factory defaults shown in bold):
->
DSP OFF
-> CLASSIC -> ROCK -> POP -> FLAT -> NONE
->
INIT VOL
-> Sets the volume when the unit is first switched on.
-> CT
-> Allows you to set the clock time.
->
TA VOL
-> Sets the Traffic Announcement Volume.
->
EON ON
-> Switches the EON function ON or OFF.
NOTE:
The unit can store up to six stations on each band
for recall at any time. A total of 30 stations can be preset 6
in each band.
