TOW DOLLY SAFETY REQUIREMENTS
2
continued from preceding page
to the front end of the vehicle or the tires, as well as
other consequential, non-warranty damage.
Fishtailing and swaying may also cause a loss of
vehicular control, resulting in a severe, life-threatening
traffic accident.
22.
Check and comply with your local, state, federal or
provincial requirements for towing.
23.
The RoadMaster tow dolly is not designed for com-
mercial applications. Commercial use will void the war-
ranty.
Read all instructions before assembling or op-
erating the tow dolly. Failure to understand how to
assemble or operate the tow dolly could result in
property damage, personal injury or even death.
Musts for installation safety
1.
Assembler must use all bolts and parts supplied as
instructed.
2.
Assembler and owner must read and understand all
instructions and heed all warnings within the owner’s
manual and the literature packet before loading any
vehicle onto the dolly.
3.
Owner must check with and comply with all local,
state, federal or provincial requirements regarding tow
dollies.
4.
Assembler must always wear eye protection while
assembling the tow dolly.
5.
Assembler must show owner how to properly load,
unload and tow the vehicle.
6.
Assembler must caution owner to use a trailer ball,
ball mount and receiver that is rated at 5,000 pounds
measure tread width
from outside edge to
outside edge
Position of
Minimum
Maximum
axles and ramps
tread width
tread width
Axles narrow; ramps narrow
32"
68"
Axles wide; ramps narrow
32"
68"
Axles wide; ramps wide
40"
76"
Failure to follow these instructions can cause
property damage, personal injury or even death.
Axle and ramp positioning chart
or more.
7.
Assembler must use solid wooden blocks or ad-
equate stands for support while assembling the dolly.
8.
Assembler must torque all bolts according to the
enclosed chart (Figure 4).
9.
Vehicles must be loaded with front wheels on dolly.
Owner must be sure that any rear wheel drive vehicle
is towable on dolly without damaging the transmission.
Rear wheel drive vehicles may require a drive line dis-
connect to prevent transmission damage.
10.
Assembler must stress importance of owner sending
in product registration card. The warranty is only valid if
the owner sends in his product registration card within
30 days. Warranty registration will allow us to expedite a
claim or contact the customer should the need arise.
Required tools
• torque wrench
• socket wrench
• ½" socket
• ½" wrench
• 9/16" socket
• 9/16" wrench
• ¾" socket
• ¾" wrench
• 13/16" socket
BEFORE YOU ASSEMBLE THE DOLLY…
