Time Tested • Time Proven
ROADMASTER, Inc. • 6110 NE 127th Ave • Vancouver, WA 98682
800-669-9690 • fax: 360-735-9300 • roadmasterinc.com
851714-18 11.18
The coupler is securely latched to the trailer ball.
Safety chains are attached to the motorhome.
The bed safety chains are secured to the towed vehicle.
The bed tilt latch has properly engaged with the ramps up.
The electrical harness is plugged into the motorhome, and the dolly lights are functioning
properly.
The steering pin has been removed for towing a vehicle.
The steering pin has been inserted for towing the dolly empty.
Auxiliary lighting has been connected to the towed vehicle, and is functioning properly.
The towed vehicle and its contents weigh less than 4,250 pounds.
The towed vehicle is centered on and square with the tow dolly.
The towed vehicle’s steering wheel is locked or otherwise secured.
The towed vehicle is in the correct gear for towing (see towed vehicle’s owner's manual).
The TieDown
™
straps are centered on the tires and tightened properly.
The TieDown straps are not twisted and cannot chafe or rub.
The ratchets are in the down position for towing and unloading.
All wheel lug nuts are torqued to 90 ft./lbs.
The Accu-Lube™ hubs have been lubricated.
The tire pressure is correct for towing — loaded or unloaded.
The nuts and bolts securing the tongue and stabilizers are tight.
The safety checklist above is not all-inclusive. Read, understand and follow
all instructions and warnings within the tow dolly and towed vehicle owner’s
manuals.
All photos, illustrations and specifications contained herein are based on
the latest information available at the time of publication. ROADMASTER, Inc.
reserves the right to make changes at any time, without notice, in material,
specifications and models, or to discontinue models. You may not use any of
the contents of this document without the permission of ROADMASTER, Inc.
© 1999-2018 ROADMASTER, Inc. All rights reserved.
PRE-TRIP SAFETY CHECKLIST
