background image

Specifications

Minimum tread width ..... 32" ramps in narrow position
 

40" ramps in wide position

Maximum tread width ... 68" ramps in narrow position*
 

76" ramps in wide position*

Overall width - narrow axle .................................. 93½"
Overall width - wide axle ................................... 101½"
Overall length ....................................................... 136" 
Height at fenders ................................................. 29½"
Weight - empty ............................................... 620 lbs.
Tires  .........................................radials ST 205/75 R14 
Adjustable TieDown

 straps ..... fit tires with diameters 

  of 30" or less and 11" or less in tread width
Coupler information ....................................2" Class III
Ball height ............................................................... 18"
GAWR  (maximum axle capacity) .................3,500 lbs.
Maximum weight of towed vehicle ................4,250 lbs.
Trailer ball size ......................................................... 2"

* Vehicles with fender flares, or with fenders that over-
hang the wheels, may be susceptible to damage during 
cornering. Refer to step 1 in the “Towing” section.

WELCOME TO THE ROADMASTER FAMILY!

T

his manual has been prepared to acquaint you with the assembly and operation of your tow dolly, and to provide 
you with important safety information. Read your owner’s manual cover to cover. Understand how to assemble 

and operate your tow dolly, and carefully follow the instructions and safety precautions. 
  Your tow dolly has a one-year limited warranty. 

To qualify for your warranty, fill out and return the enclosed 

product registration card within 30 days of purchase. 

  We thank you for your patronage, and greatly appreciate your discerning taste.

Record the serial number…

  Please record the serial number of your tow dolly 
in the space below. The number can be found on the 
front edge of the main bed. 
  Have the serial number at hand when calling for 
technical support or replacement parts. It will allow us 
to serve you faster and ensure that you receive the 
correct components.

Serial number:

IMPORTANT NOTICE!

Safety Definitions

  Statements in this manual identified as follows are of special significance:

  WARNING indicates a potentially hazardous situ-
ation which, if not avoided, could result in property 
damage, serious personal injury, or even death. 

  CAUTION indicates a potentially hazardous situ-
ation which, if not avoided, may result in property 
damage, or minor or moderate personal injury. 

  CAUTION used without the safety alert symbol 
indicates a potentially hazardous situation which, 
if not avoided, may result in property damage. 

NOTE

  Refers to important information and is placed in italic 
type. It is recommended that you take special notice of 
these items.

“Towing vehicle” and

“towed vehicle” — definition

  People frequently confuse the terms “towing vehicle” 
and “towed vehicle.” The “towing vehicle” is the one 
that pulls the dolly, while the “towed vehicle” is on the 
dolly. 
  To avoid confusion, the phrase “towing vehicle” has 
been replaced by “motorhome” (even though you may 
not be using a motorhome to tow the dolly). We will 
use the phrase “towed vehicle” as defined above.

Table of Contents

Specifications ....................................inside front cover
Safety definitions ..............................inside front cover
Tow dolly safety requirements ................................ 1-2
Before you assemble the dolly 
  (pre-assembly instructions) .................................... 2
Assembly instructions — 
  Wide axle ............................................................ 3-4
  Narrow axle ........................................................ 4-5
  Final assembly .................................................... 6-7
Before loading the dolly ............................................. 8
Using your tow dolly —
  Loading the dolly .............................................. 9-10
 Towing ................................................................. 11
  Unloading the dolly .............................................. 11
  Pulling the dolly empty ........................................ 12
Maintenance ............................................................ 12
Alignment instructions .............................................. 13
Adjusting the TieDown

 straps ................................ 14

Components ........................................................ 15-16
Limited Warranty ...................................................... 17
Pre-trip safety checklist ..............................back cover

Содержание 2000-1





















Отзывы: