Page
13
of
26
Arming Bike Trac
3-wire install
: If you install the Bike Trac unit onto your bike using a 3 wire install (recommended) the
system will automatically alarm itself when ignition is switched off.
0 and 2-wire install
: If you have installed the Bike Trac unit with only the ‘live’ and ‘earth’ connections, you
will need to activate the system by texting “arm” followed by a space, then the name you have given your
bike (via your Bike Trac portal) to ‘07817 814 206’. Please make sure you send the text message from the
mobile phone number you have saved as the primary mobile phone contact number on your Bike Trac
portal. Please see Figure 0.1 for an example.
Disarming Bike Trac
3-wire install
: If you installed the Bike Trac unit onto your bike using a 3 wire install (recommended) the
system will automatically disarm itself when ignition is switched
on.
0 and 2-wire install
: If you have installed the Bike Trac unit with only the ‘live’ and ‘earth’ connections, you
will need to deactivate the system by texting “disarm” followed by a space, then the name you have given
your bike (via your Bike Trac portal) to ‘07817 814 206’. Please make sure you send the text message from
the mobile phone number you have saved as the primary mobile phone contact number on your Bike Trac
portal. Please see Figure 0.2 for an example.
Note - 0 wires is used if you have no power lead attached at all, this will need charging using the mains
supply supplied.
Transportation Mode
Should you wish to transport your bike in a Van / Train / Ferry and your unit is a 3 wire install, simply text
your device – “disarm“ followed by a space followed by the name you have given the unit. To re-arm the
unit, turn on the ignition, count to 5 then turn off the ignition.
Содержание Bike Trac
Страница 1: ...Product Manual User Guide Version 0911...
