Page
11
of
26
Please note that the Bike Trac is waterproof. The wiring looms also have a 2 amp fuse, to protect from
power surges.
Fitting and installation: a step-by-step guide
Please Note: Bike Trac must be fitted by a professional automotive electrician with a Thatcham or
manufacturers accreditation. The following instructions are to guide qualified installers in fitting the Bike
Trac unit.
Step 1
Remove Bike Trac unit from packaging. You must charge the unit prior to installation using the mains
charger provided, for a minimum of 2 hours. This will help ensure the installation process is conducted
without any problems.
Step 2
Remove the Bike Trac information card form the box (located under the lid) and keep it to hand, as you will
need it at a later stage. After the install is complete, please ensure this card is given to the customer for
them to keep in a safe place, as it explains how to arm and disarm their Bike Trac unit, as well as what to do
if they get an alert.
Step 3
1.
Install wiring loom onto bike
2.
Connect the Live (red) wire to a live power feed
3.
Connect the Earth (black) wire to an Earth source
4.
Connect the Ignition (blue) wire to an ignition feed. Please note that you do not have to connect this
wire however it is recommended as it will enable Bike Trac to be armed and disarmed by using the
ignition. Otherwise you will have to arm and disarm Bike Trac by sending an SMS text message. You
also need to have the ignition feed connected if you wish to use see breadcrumb trails of where you’ve
been – as part of the journey tracking feature.
5.
Position the Bike Trac unit in a hidden place on your bike. We advise you not to place the unit under
any metal surfaces as this will impede the ability of the unit to acquire a GPS signal. Once you have
attached the unit, plug in the wiring loom. (Do not share the location of the unit If known)
6.
To ensure the unit is working correctly and ‘talking’ to the Bike Trac computer servers, please log onto
http://install.biketrac.co.uk
and follow the prompts. This is an installation wizard that will ensure the
Bike Trac unit is functioning correctly, and allow you to set up the operating settings, including the
number of wires used for install (0, 2 or 3).
Step 4
The Bike Trac customer must now register the unit with Road Angel, via our website at
www.roadangelgroup.com.
They need to click on ‘Registration’ on the top menu bar and follow the
prompts. By registering with us, this will enable the customer to manage all aspects of their Road Angel
account, including adding or amending subscriptions for their Bike Trac product, and will also set-up their
Содержание Bike Trac
Страница 1: ...Product Manual User Guide Version 0911...
