MICON 500C Electronic Sequencing
3
234AY00.INS R06
Computer Installation Guide
2.0
PRE-INSTALLATION CHECK (CONT’D)
3. The MICON 500C digital display can be manually triggered to display configuration event
counters data in the dollar and volume displays, followed by the software version number in
the price display. To do this:
Ø
Flip the handle switch rapidly ON, then OFF. The display will show the configuration
event counters in the dollar and volume displays, and the software version in the
price
display
.
Ø
The event counter in the
dollar display
indicates the number of times settings have
been changed in “MICON” mode (metrological configuration parameters) with the INFO-
PAC.
Ø
The event counter in the
volume display
indicates the number of times the settings
have changed in the “m500C” mode of the INFO-PAC.
configuration event counter in
dollar display
:
Indicates number of times settings have been changed in m500 mode (“micon”
mode) with the INFO-PAC. m500 mode is used to control liquid fuel flow in
earlier INFO-PAC models, and certain CNG fuel flow features in INFO-PAC
version 3.0 and later software.
configuration event counter in
volume display
:
Indicates number of times settings have changed in “m500c” Info-Pac mode.
m500c mode is
used to configure MICON heads used to dispense CNG.
software version number in
price display
INFO-PAC model M500C is designed to configure MICON 500C pump
computer heads used to control flow of CNG product (compressed natural
gas) from dispensers.
The INFO-PAC is a
transmitter
and
receiver
. Programmable pumphead
features can be set up in the INFO-PAC memory, then transmitted to MICON
heads. The INFO-PAC also receives and displays features already
programmed to MICON pumpheads.
MICON 500C Display
INFO-PAC
FIGURE 3 – INFO-PAC AND CONFIGURATION EVENT COUNTERS ON THE MICON 500C
