7
Mast
Mast
Assembly
Actuator
SECTION DETAIL
Actuator Assembly
Shaft
Hand Control
Handle
Housing
Weight Plates
Main Frame
Swivel Caster
& Brake
Battery
Control
Box
Tie wrap
holder
Actuator
cable
Bolt
24 volt
motor cable
Mast Mounting Plate
Base Assembly
Fixed Caster
Seat Belt Strap
Chair Assembly
Bolt
Support Arm
Actuator Arm
Chair Support Arm
SIDE VIEW
Bolt
Washer
Act. Arm
Spacer
Acturator
Lock Nut
Component Identification
PAL-Portable Aquatic Lifting Systems
B. UNPACKING & ASSEMBLY INSTRUCTIONS
REFER TO THE DIAGRAM (above) FOR PARTS IDENTIFICATION.
READ THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE
UNCRATING PAL.
Prior to opening the pallet, inspect the external condition for any visible
damage. It is important that any damage be noted on the Bill of Lading.
Contact RehaMed or dealer immediately to notify of missing or damaged
parts.
The
PAL
is shipped on a cardboard covered pallet. This pallet is VERY
HEAVY. You will need to gather the following tools to begin the unpacking
and assembly of your unit:
• a Phillips head screwdriver or powered drill to remove the cardboard
• a 3/4” socket wrench
• a small flat blade screwdriver
• a knife or cutters to cut the shrink-wrap and bands.
