12
Splash! / Splash! Hi-Lo / Splash! HD / Splash! Mariner
Base Assembly Only
Base Assembly.
The part of the Splash! that mounts to the pool deck or
boat dock. The Base Assembly is made up of several components as
described below:
Rotation Motor Assembly.
Consists of mounting plate, 24-volt motor,
and small gear.
Hub Assembly.
Consists of hub, bearings, shaft, large gear and mast
mounting plate.
Base Insert Stem.
This piece slides into the anchor sleeve that is installed
on the pool deck or dock. The insert can either be round or square to
adapt to the designated sleeve.
Control Console Bracket.
This tubular component bolts to the base
assembly and provides a mounting base for the control console.
Housing.
Aluminum covering to cover base assembly components from
weather. Needs to be in place prior to installing the mast assembly.
Attachment Cover.
Slides down over housing to cover hardware (bolts
and washers).
