11
All PAL and Splash! Products – Standard Components in all Units
Control Box.
Forms the bottom of the control console; this unit controls
the mechanical operations of the lift. Three wire leads connect to the rear
of the Control Box. The largest receptacle is the connection for the Hand
Control. The connector next to the hand control connector, marked num-
ber 1, is the receptacle for the Actuator lead. The connector
next to the actuator connector, marked number 2, is the
receptacle for the 24-volt motor lead.
Battery.
The removable Battery is located on top of the
control box. The battery should be charged frequently. Do
not allow to fully discharge.
Hand Control.
Initiates the actions of the lift. The two top
pairs of buttons control the lifting actions of the unit. The
user can select “fast up/fast down” or “slow up/slow
down” based on their individual comfort level. The bottom
pair of buttons controls the side to side movement of the
lift. The right button turns the main mast to the right, and
the left button turns the main mast to the left.
Mast.
This vertical piece is bolted to the base assembly.
Actuator.
Attached to the top of the mast, this part powers the up and
down movements of the lift.
Horizontal Support Arms.
These two support arms connect the mast to
the chair support arm. The longer horizontal support arm (actuator arm)
connects to the actuator and initiates the lifting movements.
Chair Support Arm.
Connects the chair to the horizontal support arms.
Chair Assembly.
Connects to the Chair Support Arm.
C– PRODUCT COMPONENTS
REFER TO THE DIAGRAM ON PG.13 FOR COMPONENT IDENTIFICATION.
