RMS Gill 2, Инструкция по установке и эксплуатации

Страница: 6 / 20

TRANSPORTATION
The Gill 2 Seating System is the result of experienced, thoughtful design and
rigorous testing over 12 months of in-house testing and frontal impact testing.
The Gill 2 was successfully tested to
ISO 16840-4 at the Transport
Research Laboratory in May 2013,
using the HIII 5th Percentile Test
Dummy to 49Kg.
However, this does not imply and is not
intended to imply in any way, that the
GILL 2 Seating System is suitable for
transporting an occupant in a motor
vehicle in any other way than with the
GILL 2 Seating System being correctly
interfaced with a surrogate wheelchair
of a type and model which has been successfully tested in its own right, to meet
the requirements of ISO 7176-19 (Wheeled mobility devices for use in Motor
Vehicles).

The transporting vehicle MUST be suitably equipped with wheelchair and
occupant restraint systems compliant with ISO 10542.
Under No Circumstances should any part of a transportation restraint
system, be attached directly to the GILL 2 Seating System.

ALWAYS check both backrest retaining strap buckles (Fig.4) are connected &
tensioned sufficiently prior to using the GILL 2 on transportation.

Whilst provision is made on the GILL 2 Backrest for attachment of an ancillary
Postural Positioning Harness, which, if fitted, should still be utilised as normal
during any transportation period, this positioning device should
NEVER be
used as the sole method of occupant restraint during transportation.
The restraint systems used for the surrogate wheelbase and occupant during the
above testing, are manufactured by:-
Unwin Safety Systems.
C.N. Unwin Ltd., Unwin House, The Horseshoe, Coat Road, Martock, Somerset, TA12 6EY.
Tel: 01935 827740 Fax: 01935 827760
Email: sales@unwin-safety.co.uk
Web: www.unwin-safety.com
Part numbers:-
Wheelbase restraints: Front
—OF03 Rear—OR02
Occupant restraints: Static 3PT
These kits meet the requirements of ISO 10542, (Wheelchair Tie-downs and
Occupant Restraint Systems).
If the intended transporting vehicle is not already fitted with Unwin type anchorage
tracks, details of these can also be obtained direct from Unwin Safety Systems Ltd
NOTE: Installation and use of all restraint systems should always be strictly as per
their manufacturers recommendations.
6