QUICK GUIDE
Unfolding the eFOLDi Power Chair
Before starting place the Power Chair in an open space
away from pets and small children.
Unfolding is straightforward and with a little practice
you will be able to set it up in seconds.
We advise you to practise with the scooter before
venturing out for the first time.
1
Anti-tip wheels and battery
charger are supplied with your
Power Chair.
2
Install the anti-tip wheels if
desired. These simply press and
lock into place.
3
Unfold the Power Chair by simply
pushing the seat bottom down.
4
Keep controller cable away
from pinch points like the
armrest supports.
5
Install armrest supports into the
slots and press them down until
they lock.
6
Take the controller unit and…
7
…insert the controller rod into the
armrest fitting under the
armrest…
8
…adjust the position of the
controller and tighten with the
knurled knob.
9
Remove attendant control from
back pocket and attach to the bar
at rear.
10
Pull foot rest down.
11
Install seat cushions as shown.
These are held in place by
Velcro tabs
…
12
…
make sure these are folded over
the back rest and under the seat.
Power Chair is now ready.
Please note this leaflet is intended to be a quick guide only. For full instructions, please refer to our user product manual.
Any questions, please call us on 0800 915 0800 or email
