background image

steerable
knee walker

www.drivemedical.com

lifetime limited

warranty

Your Drive brand product is warranted to be free 

of defects in materials and workmanship for the 

lifetime of the original consumer purchaser.

This device was built to exacting standards 

and carefully inspected prior to shipment. This 

Lifetime Limited Warranty is an expression of our 

confidence in the materials and workmanship of 

our products and our assurance to the consumer 

of years of dependable service. 

This warranty does not cover device failure 

due to owner misuse or negligence, or normal 

wear and tear. The warranty does not extend to  

non-durable components, such as rubber 

 

accessories, casters, and grips, which are subject 

to normal wear and need periodic replacement. 

If you have a question about your Drive device or 

this warranty, please contact an authorized Drive 

dealer.

© 2006 Medical Depot, Inc. All rights reserved.

Drive is a trademark of Medical Depot, Inc.

Port Washington N.Y. 11050  USA  Made in China

EU Authorized Representative 

Drive International, LLC

Globe Lane - Stockport

DUKINFIELD SK16 4RE, GB

Summary of Contents for 790

Page 1: ... consumer of years of dependable service This warranty does not cover device failure due to owner misuse or negligence or normal wear and tear The warranty does not extend to non durable components such as rubber accessories casters and grips which are subject to normal wear and need periodic replacement If you have a question about your Drive device or this warranty please contact an authorized D...

Page 2: ...and positioned forward to cover the full length of bench With injured leg on bench stand as straight as possible adjust the height of the Knee Walker as necessary With injured foot pointing down the propulsion leg should be maintained as close as possible to the bench While on your toes start out with small steps with propulsion leg Concentrate on keeping that leg next to the bench With practice y...

Page 3: ...ng an allen key by turning clockwise 4 Straighten tiller to the upright position Slide second screw into receptacle figure 3 5 Secure scew and tiller in place by pushing locking handle against the side of the tiller figure 4 6 Insert seat post into seat receptacle on frame Set to desired height and secure in place by inserting thumb screw and turning clockwise until tight figure 1 figure 2 figure ...

Page 4: ...ger tips toward the handle bar To lock the brake pull the brake lever towards the handlebar and push down spring loaded push button located on top of brake When done correctly push button with remain down and brake lever will be locked in place Repeat for other brake To release brake simply pull lever towards the handle bar Push pin will pop upautomatically using the hand brake adjusting the hand ...

Reviews: