RMS Gill 2, Инструкция по установке и эксплуатации

Страница: 11 / 20

SEAT DEPTH ADJUSTMENT
From the standard position, Seat Depth can be
extended forwards by up to 75mm.
Tools Required: 10mm Spanner
To adjust Seat Depth:-
1. Remove the Velcro attached Seat Cushion.
2. Slacken the domed Nylock Nuts securing the
front Pelvic Support Brackets Fig.5a.
3. Slide Seat Depth Adjustment Panel forwards to
the required position and retighten the domed
Nylock Nuts Fig.5b.
4. Re-attach Seat Cushion with front edge just
overlapping the newly positioned Adjustment
Panel. The Cushion is designed to be long
enough to cover the Seat Panel when set to
maximum length.
BACKREST HEIGHT ADJUSTMENT
From the standard position, the Backrest height is
adjustable upwards by 75mm.
Tools Required:
4mm Hexagon Key
To adjust Backrest Height:-
1. Remove the Velcro attached Backrest Cushion.
2. Using the 4mm Hexagon Key, slacken the M6
Hex. Head Screws securing the Backrest
Extension Panel, Fig.6a.
3. Slide Backrest Height Adjustment Panel
upwards to the required position and retighten
the M6 Hex. Head Screws, Fig.6b.
4. Re-attach Backrest Cushion with top edge just
level with the newly positioned Adjustment
Panel.
The Cushion is designed to be long enough to
cover the Backrest Panel when set to maximum.
11
Fig.5a
Fig.5b
M6 Domed
Nuts
Adjustment
Panel
Adjustment
Panel
M6 Hex.
Drive Screws
Fig.6a
Fig.6b