RMG TME400-VM, Руководство по эксплуатации

Страница: 58 / 137

4 Operation
Manual TME400-VMF · EN07 · December, 7
th
2020
52
V Q p/T Calc I/O Par Status Info
Figure 12: 8 columns of the coordinate system
Note
With the TME400-VM and TME400-VMF turbine meters, the p/T and Calc.
columns cannot be selected.
With the cursor buttons (arrows)
◄ ▲ ▼ ► OK
you can reach each value by gently pressing the desired button in this coordinate
system.
Keypad Description Effect
◄
Left arrow Switches the column of the table from right to left
▲
Up arrow
Upward movement within the column of the table:
You move from the last value of the list towards the
first value.
This is also used to adjust numbers (counting up).
▼
Down arrow
Downward movement within the column of the table:
You move from the first value of the list towards the
last value.
This is used to adjust numbers (counting down).
►
Right arrow Switches the column of the table from left to right
OK
Function
The following functions are triggered by pressing:
pressed < 2 seconds = display of the coordinate
pressed > 2 seconds = shows the coordinate
pressed > 2 seconds = switch to settings mode
(see below)