RLE Technologies Falcon Wi-MGR, Руководство пользователя

Страница: 46 / 74

46 Wi-MGR User Guide 800.518.1519
3
Web Interface
Net Mask The Wi-MGR is shipped with a default Subnet Mask of
255.255.255.0. Contact your IT Department for an appropriate
Subnet Mask, if you wish to change this field.
Default subnet mask: 255.255.255.0
Def Route The Wi-MGR is shipped with a default Gateway Route of 10.0.0.1.
Contact your IT Department for an appropriate Default Gateway, if
you wish to change this field.
Default device route: 10.0.0.1
Tcp Max Seg Size The Wi-MGR defaults to 1436 packet size for web page data. Users
may select 536 for limited bandwidth or VPN applications.
Default: 1436
Http Port Some ISPs use alternate http ports as an added security measure.
Edit this field in accordance with your ISPs security settings.
Default: 0 = Port 80
Web User Name If this field is left blank, the Wi-MGR’s default user name is fds (all
lower case). Users can enter a user name up to 18 characters,
either alpha, numeric, or a combination of the two. The Wi-MGR
user name is case sensitive.
Default username: fds
Web Password Read
Only
Two separate passwords can be configured on the Wi-MGR.
The Read Only password allows users to access the Wi-MGR’s
web interface and view the conditions of the system, but does not
allow users to make changes to the Wi-MGR’s configuration.
Web Password
Read/Write
The second configurable password on the Wi-MGR provides users
with expanded access.
The Read/Write password allows users to view the conditions of the
system and make changes to the Wi-MGR’s configuration.
Web Refresh Rate The Web Refresh Rate is the amount of time the system waits until
it updates the Web interface with current data. To change the rate,
click in the field and type in the desired amount of time (in seconds).
The minimum recommended refresh rate is five seconds;
otherwise, errors may occur that prevent the system from
functioning properly .
The default refresh rate is set to 0 - the Wi-MGR will not refresh at
all. Users must set a refresh rate in order for the system to
automatically update.
Default: 10 seconds
Option Description
Table 3.6 Network and Web Configuration Options