RKI Instruments RI-600, Руководство оператора

Страница: 6 / 61

6
2-3. Caution Statements
CAUTION
•
Do not use a device, such as a transceiver, which transmits a radio wave near the monitor or its
cables. It may affect the measurement. If a transceiver or other radio wave transmitting device is
used, it must be used in a place away from the monitor.
• Restarting the monitor within five seconds after turning it off may cause errors.
•
This is not a control unit. It is not allowed to use the external output of the monitor to control other
units.
• This is a safety unit. Make sure to perform regular maintenance to ensure safety. Continuing to
use the monitor without performing maintenance will compromise the sensitivity of the sensor,
thus resulting in inaccurate gas readings.
•
Do not pick the sensor or buzzer opening with a sharp-pointed item. The unit may cause
malfunction or get damaged, possibly resulting in incorrect measurements.
• Do not also install the monitor in a place where the monitor may get wet. Ignoring this may cause
the monitor to malfunction.
•
This is a precision device. Do not apply strong shock or vibration to the monitor.
• When the case is opened for wiring or other operation, do not touch inner parts. When wiring, be
sure that excessive pressure is not applied to the power cable or remote sensor cable.
•
Do not block the vent for the sensor.