RK Rose+Krieger RKPowerlift Memory Synchro, Руководство по сборке

Страница: 47 / 183

6. Product information
47
D
e
u
ts
ch
E
n
g
li
sh
Fr
a
n
ça
is
E
sp
a
ñ
o
l
It
a
li
a
n
o
6.1 How it works
The RKPowerlift
(telescopic, rack or spindle)
lifting column is used to adjust the height of tables or
other setting tasks of a comparable kind. It is driven by a low voltage motor.
6.1.1 Versions
The lifting column is available in two versions. The versions differ by the number of lifting columns
that can be interconnected.
Lifting column with internal controller and memory
The controller is built into the lifting column. The lifting column is driven with a hand switch that
is connected directly to the column.
In addition to manual movement of the lifting column, positions can also be saved and driven to
at the press of a key.
Lifting column with internal controller and memory synchronisation
The controller is built into the lifting column. The lifting column is driven with a hand switch that
is connected directly to the column.
Up to eight lifting columns can be interconnected.
In addition to simultaneous (synchronous) manual movement of the lifting columns, positions can
also be saved and driven to at the press of a key.
After receiving this lifting column, check the device for possible damage and missing compo-
nents.
If you find any faults, inform RK Rose+Krieger GmbH of these immediately.