A27
STEP 6-11 TAIL BRACE INSTALLATION
STEP 6-12 TAIL BRACE ASSEMBLY
M3x12 Socket Head Bolt
M3x10 Socket Head Bolt
Tail Brace
32mm Crossmember
M3x10 Socket Head Bolt
Tail Brace
M3x12 Socket Head Bolt
USE THREADLOCK
NOTE:
Fix the two M3x10 Socket Head bolt form
the Horizontal Fin with Threadlock in this Step
View of the completed Assembly
Selftapping Screw 2x6
Selftapping Screw 2x6
CF Control Rod
Control Rod Guide
NOTE:
The tail control guides are flat when
they come from the kit. It is a good
idea to bend them around the tail boom
before attachment so they are easier
to handle.
630mm 2x4 Cf Rod
60mm Special Rod
Linkage
P
X
Y
E
O
IMPORTANT:
Use EPOXY to glue the
special rod into the CF tube.
NOTE:
Assembly bot side of the CF Control Rod
NOTE:
Assembly both sides of the CF Control Rod
Before attaching the Linkage pass the 8mm heatshrink onto the cf rod.
After adjusting the length heat up the shrink covering the begining of the
linkage and the carbon rod.
NOTE:
Add the Bushing if necesary.
Fix the Tail control guide with the
delivered cable binders to avoid the
CF rod come out.
630mm 2x4 Cf Rod
60mm Special Rod
Linkage
P
X
Y
E
O
IMPORTANT:
Use EPOXY to glue the
special rod into the CF tube.
NOTE:
Assembly bot side of the CF Control Rod
Let aprox. 10mm out
of the CF rod from the
Linkage rod
