A20
STEP 5-11 CONTROL ROD INSTALLATION
USE THREADLOCK
M2,5x6 Socket Head Bolt
Flybar Control Arm Linkrod
M2,5x6 Socket Head Bolt
Linkage Rod B
Linkage Rod C
Linkage Rod A
NOTE:
The size of the linkage rod can variate depending
on the head setup. In the STEP 8-2 will be an
example of setup with the acording sizes of the
linkage rods.
By looking closely, you will notice on the universal
links the letters RJX (on the small) and RJXHOBBY
on the large links. ensure this are always pointed
outside from the ball as shown in the diagram below.
RJX or RJXHOBBY
Link A
Link B
Link C
NOTE:
Assembly both sides of the flybar control
arm on the same way
Use four short links
and two 20mm rod
Use two short and two long
links and two 25 mm rod
Use four long links
and two 70mm rod
