manualshive.com logo in svg

RJX Hobby X-TREME 50, Руководство по сборке

Поделиться
Скачать
RJX Hobby X-TREME 50 Скачать руководство пользователя страница 3

I2

TABLE OF CONTENTS

1.  Introducion

2.  Table of contents

3.  Additional Items Required

4.  Tools Required

5.  Assembly

6.  Servo Installation

7.  Servo Adjustment

8.  Rotor Head Setup

9.  Final Servo and Radio Setup

10. Please read before flight

11. Spare Parts List

I1 

I2

I3

I4

A1 - A28

S1-S4

S5-S6

Rh1-Rh3

R1-R5

Pf1

SP1 - SP6 

This manual contains the detailed instructions to build and set up the                 . Please follow it to ensure that you 
achieve the best performance and mechanical integrity from your finished kit. For those of you who already have 
experience of model helicopters, we still suggest that you assemble and adjust your model according to these 
instructions for the best results. Please keep your copy of this manual in a safe place and refer to it when replacing 
spare parts or upgrading. 

                                     Remove oil and grease then apply threadlock. (This applies throughout the manual)

                                     Remove oil and grease then apply threadlock. (This applies throughout the manual)

       Please refer to the list at the end of this instruction manual when you need spare parts.

Regardless how tight the nuts, bolts and screws are tightened, they will still slowly come loose over a period of time 
due to vibration from the helicopter. Should this happen the helicopter wil become out of control or severely damaged 
causing a very potential dangerouse situation. 

We strongly recommend that you apply threadlock to any nuts, bolts or screws that are indicated by these signs.

There are two types of threadlock, blue (soft) and red (hard). Use blue threadlock on screws 
that have to be removed regularly and red threadlock for screws that should be fixed permanently.

TO PREVENT LOOSE SCREWS AND BOLTS

HOW TO USE THIS INSTRUCTION MANUAL

Содержание X-TREME 50























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды