A6
STEP 2-3 Main Frame Assembly
M3x10 Socket Head Bolt
with Finish Cap´s
IMPORTANT:
DO NOT use Threadlock in this stage for the Bearing Blocks,
Clutch Bell Assembly, and Tail Pinion Drive Assembly, for
later adjustment. It will be indicated when Threadlock
should be used.
M3x40 Socket Head Bolt
M3x10 Socket
Head Bolt
Gyro Tray (To fit into the upper cutout)
32mm Crossmember
Tailboom Holder
32mm Stepped Crossmember
Main Frame Right (Assembled in Step 2-1)
View of the completed Assembly
USE THREADLOCK
Main Frame Left (Assembled in Step 2-2)
STEP 2-4 Main Frame Assembly
USE THREADLOCK
View of the completed Assembly
Assembled in Step 1-8
M3x8 Socket head Bolt
Main Frame Assembly in STEP 2-3
M3 Lock Nut
Gyro Tray
