3
signal can be sent to a different amp, and can be turned on and off
independently.
A
– This button turns the A output on and off. When this button is lit,
the A output is on. When this button is not lit, the A output is off
(shorted to ground).
B
– This button turns the B output on and off, and also inverts the B
output. Pressing the button cycles through three states:
Red
– The B output is on and is not inverted.
Orange
– The B output is on and is inverted. In this mode,
the signal should be buffered. Otherwise, it may sound dull.
Off
– The B output is turned off (shorted to ground).
Write
– When held down for 3 seconds, this button saves the current
switch state to non-volatile memory. This function is not active until
a Program Change message is received at the MIDI In jack. See the
MIDI Usage section for more details.
The Write button is always lit up with a green LED to indicate that the
Y-Not is powered on.
