10
Troubleshooting
Problem:
My guitar sounds muddy or too quiet when running
through the Y-Not.
Solution:
Your signal needs to be buffered. Press the Buffer button
on the front of the Y-Not, and you’ll be sounding good once again.
Problem:
When running into an amp with two inputs, the signal
level drops when I turn on both the A and B output.
Solution:
The two inputs of your amp are out of phase with each
other. Press the Invert B button to fix the phase inversion. You may
also need to press the Buffer button to avoid possible tone loss.
Problem:
There is excessive hum or buzz.
Solution:
There is likely a ground loop in your system. Press the Iso B
button to engage the isolation transformer. You may also need to
press the Buffer button to avoid possible tone loss.