manualshive.com logo in svg

RJG Lynx LES-B-127-125, Руководство по эксплуатации продукта

Поделиться
Скачать
RJG Lynx LES-B-127-125 Скачать руководство пользователя страница 64

Lynx™ Embedded Sensors LES‑B‑127‑50/125/500/2000 | Product Manual

56

SIMILAR PRODUCTS

RJG, Inc. offers a wide array of cavity 

pressure sensors for each application—

strain gage, single‑channel, multi‑channel, 

and digital.

LYNX EMBEDDED 4,000 POUND SENSOR

The Lynx Strain Gage LES‑B‑159‑4000 

button‑style sensor provides the 

same strain gage technology and 

indirect installation style as the 

LES‑B‑147‑50/125/500/2000 sensors, 

but with a greater pressure threshold. 

The additional pressure range requires 

the LES‑B‑159‑4000 to have a larger 

sensor head than its counterparts, and 

thus requires greater mold real estate for 

installation.

LYNX MULTI‑CHANNEL STRAIN GAGE 

SYSTEM

The Lynx Multi‑Channel Strain Gage system  

(

1

 at right) saves real estate on the mold 

providing simplified installation of up to 

eight sensors to one connection point on 

the mold.

2. 

Eight‑Channel Strain Gage Adapter with 

Mold ID SG/LX8‑S‑ID

The ID SG/LX8‑S‑ID adapter resides on the 

molding machine, allowing technicians to 

move molds easily by disconnecting and 

connecting the connector cable. A Lynx 

cable then connects the adapter to the 

eDART system.

3. 

Eight‑Channel Sensor Plate with Mold ID 

SG‑8

The SG‑8 plate resides on the mold 

allowing users to interface up to eight 

multi‑channel strain gage sensors. A 

Lynx cable then connects the plate to the 

adapter and the eDART system.

1

4. 

Lynx Multi‑Channel Strain Gage Button 

Sensors MCSG‑B‑127‑125/500/200 and 

MCSG‑B‑159‑4000

The MCSG‑B‑127‑125/500/2000 and 

MCSG‑B‑159‑4000 sensors provide 

the same strain gage technology 

and indirect installation style as the 

LES‑B‑147‑50/125/500/2000 and 

LES‑B‑159‑4000 sensors, but are 

compatible with the mold or machine‑

mount multi‑channel components.

Содержание Lynx LES-B-127-125



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды