Lynx™ Embedded Sensors LES‑B‑127‑50/125/500/2000 | Product Manual
12
1.
Sensor Head Pocket
Sensor and transfer pin head pockets
are machined into the clamp plate. The
sensor pockets must be centered under
the selected ejector pin measuring 0.510”
+0.005/‑0.0 (13,00 mm ±0,10 [
1
at right
])
DIA, and 0.374” +0.002/‑0.001 (9,49 mm
±0,01 [
2
at right
]) deep.
2.
Transfer Pin Head Pocket
Choose an ejector and transfer pin
appropriate for the application (refer to
“Sensor and Ejector Pin Size” on page
2). Ejector and transfer pin must be
concentric within 0.030” (0,76 mm) or
10% of ejector pin diameter—whichever is
smaller. Ejector and transfer pin diameter
0.25” (7,0 mm) MAX, and must be equal in
diameter.
Transfer pin head pockets must be
centered under the selected ejector pin
measuring the transfer pin head height plus
a clearance of 0.01” (0,3 mm [
3
at right
])
MIN. Chamfer the transfer pin head pocket
at 45° (
4
at right
) to the lead‑in of clamp
plate, and fit the pin with an H7/g6 fit (
5 i
at right
) for at least 0.50” (12,0 mm) MIN.
INSTALLATION SPECIFICATIONS (
continued
)
NOTES
L
There must be 0.50” (12,0 mm) MIN
clamp plate thickness above the
transfer pin head to transfer pin
clearanced exit, equaling 1/3 of
the pin length; if 1/3 pin length not
possible in clamp plate thickness,
use head‑to‑head concept on page
10.
Chamfer the lead‑in at 30° (
6
at right
) to
the ejector plate for a depth which equals
the transfer pin DIA, and provide clearance
for the transfer pin in the ejector plate
equal to pin DIA plus 0.04” (1,0 mm) if pin
DIA is < 0.12” (3,0 mm), or 0.06” (1,5 mm)
if pin DIA is > 0.12” (3,0 mm). Transfer pin
must be 0.01” (0,3 mm) longer than nominal
for initial fit, then adjusted to obtain the
correct height.
1
0.510” +0.005/‑0.0 (13,0 mm ±0,10) DIA
2
0.374” +0.002/‑0.001 (9,49 mm ±0,01)
3
0.01” (0,3 mm) MIN
4
45° Chamfer
5
H7/g6 for 0.50” (12,0 mm) MIN
i
6
30° Chamfer, Depth=Pin DIA
7
If Pin DIA < 0.12” (3,0 mm), + 0.04” (1,0 mm); If
Pin DIA > 0.12” (3,0 mm), + 0.06” (1,5 mm)
1
2
4
5
3
7
6
CLAMP PLATE (TYPICAL) INSTALLATION
Содержание Lynx LES-B-127-125
Страница 2: ...PRINT DATE 08 24 2021 REVISION NO 0 ...
Страница 8: ...Lynx Embedded Sensors LES B 127 50 125 500 2000 Product Manual vi NOTES ...
Страница 58: ...Lynx Embedded Sensors LES B 127 50 125 500 2000 Product Manual 50 NOTES ...
Страница 65: ......
