13
3.6.2 Setting the temperature
3.6.3 The Spa screen
(user functions)
All Equipment Access
The Spa Screen shows all available equipment to control, as well as other
features, like Invert. The display shows icons that are related to the equipment
installed on a particular spa model, so this screen may change depending on
the installation. The icon buttons are used to select and control individual
devices. Some devices, like pumps, may have more than one ON state, so the
icon will change to reflect the state that the equipment is in. Below are some
examples of 2-speed Pump indicators.
If the Spa has a Circ Pump, a Circ Pump Icon will appear to indicate its activity,
but outside of Priming Mode, the Circ Pump cannot be controlled directly.
NOTE: The icon for the pump that is associated with the heater (Circ or P1 Low)
will have a red glow in the center when the heater is running.
Commissioning and Operation
Navigation
Navigating the entire menu structure is done by touching the screen. When
a text item is shown in white on the main screen, it is selectable. The menu
selections on the right side of the screen can be selected. Select one of these
to enter a different screen with additional controls.
Most menu screens time out and revert to the main screen after 30 seconds
of no activity. The only item that can be changed on the left side of the Main
Screen is the Set Temperature. Touch either the set temperature line or the
water temperature to go to the Set Temperature screen. See next page.
Messages
At the bottom of the screen, messages may appear at various times. Some of
these messages must be dismissed by the user (see pages 22-26).
