![background image](http://html1.mh-extra.com/html/riverbed/xh2-240/xh2-240_quick-installation-manual_1465732009.webp)
XH2-240 Hardened Access Points
9
Snug the grommet assembly against the Ethernet plug and slide the collar over that.
Screw the collar onto the AP until it is snug, to provide a water tight fit.
Repeat for the GIG2 port, if you are using it.
Connect the Antennas
The XH2-240 has four male Type N connectors (ANT1-ANT4) for the antennas on each side of
the AP, for a total of eight inputs. The antennas labeled IAP1 are for the 2.4GHzz/5GHz dual-
band radio. The antennas labeled IAP2 are for the 5GHz fixed-band radio.
If you are using radio IAP1, all four of the AP's IAP1 inputs must be attached to antenna leads.
The antenna must support the frequency band you will use (for example, 2.4GHz), and IAP1
must be configured to that band on the AP (see
Step 9 on page 10
).
Similarly, all four IAP2 cables need to be connected to a 5GHz antenna.
For the Riverbed Omnidirectional Dual Band 4x4 Quad Antenna, follow the instructions that
come with the antenna to attach it to the AP.
If you are using Bluetooth, remove the cover from the AP’s Bluetooth connector, located on the
bottom of the unit as shown on
page 6
. Securely attach the antenna.
8