Riverbed SteelHead 3070-SD, Руководство пользователя

Страница: 77 / 124

Configuring BGP and OSPF Routing Policies on SteelHead SD | 77
Configuring route maps
6. To define the match and set criteria, select the route map to expand the page. The Match Criteria
and Set Criteria tabs are displayed depending on the match and set requirements for each use case.
Figure 8-10. Match Criteria and Set Criteria tabs
7. Fill out the fields for the Match Criteria and Set Criteria using this table. The criteria differ according
to the use case you have chosen.
Use case Match criteria Set criteria
Route
injection in
OSPF • Interface - Optionally, select the interface.
When the interface matches the next-hop
interface of the route, the route qualifies for
redistribution by the router.
• IP list - Optionally, select an IP list. When a
routes prefix address matches a prefix in the
list, then that route is qualified for distribution.
• Next hop list - Optionally, select the next-hop
prefix. When the next-hop address matches
the selected address, the route qualifies for
distribution by the router.
• Metric - Optionally, enter a value from 0 to
4294967295. When a metric value in a route
matches this value, the route qualifies for
distribution by the router.
• Tag - Optionally, enter a value from 0 to
4294967295. When a tag in a route matches
this value, the route qualifies for distribution
by the router.
No set criteria required.
Default route
origination in
OSPF • Metric - Optionally, enter a value from 0 to
4294967295. When a metric value in a route
matches this value, the route qualifies for
distribution by the router.
• Tag - Optionally, enter a value from 0 to
4294967295. When a tag in a route matches
this value, the route qualifies for distribution
by the router.
• Tag - Optionally, enter a value from 0 to
4294967295. When a tag in a route
matches this value, the route qualifies for
distribution by the router.