Riverbed SteelHead 3070-SD Скачать руководство пользователя страница 110

Страница: 110 / 124

110 | Health Check and Reporting on SteelHead SD

Viewing the SteelHead SD HA status

3. Under Manageability: Connectivity, click the plus sign (+) next to the Connectivity and the

Management Interfaces sections. The current status for the appliance and management interfaces is
displayed.

Figure 12-1. Viewing if SteelHead SD is connected to SCM

Viewing the SteelHead SD HA status

You can view the SteelHead SD high availability (HA) status of the appliance in the Health Check >
Appliance Health page.

To view the SteelHead SD HA IP address and status

1. Choose Health Check > Appliance Health.

2. Select the SteelHead SD appliance to expand the page.

3. Under Manageability: Hardware, click the plus sign (+) next to High Availability. The current HA status

for the appliance is displayed.

Figure 12-2. Viewing the SteelHead SD HA status

Displaying underlay ARP tables

SCM displays the underlay Forward Information (FIB) and Address Resolution Protocol (ARP) tables for
SteelHead SD 570-SD, 770-SD, 3070-SD appliances and the SteelConnect SDI-2030 gateway located at
the branch.

Содержание SteelHead 3070-SD





























































































































Результаты поиска

Содержание SteelHead 3070-SD

Отзывы:

Бренды по названию

Популярные бренды

Riverbed SteelHead 3070-SD, Руководство пользователя

Результаты поиска

Содержание SteelHead 3070-SD

Отзывы:

Бренды по названию

Популярные бренды