Riverbed SteelHead 3070-SD, Руководство пользователя

Страница: 34 / 124

34 | Configuring AutoVPN on SteelHead SD
Configuring AutoVPN on SteelHead SD
• Override AutoVPN port - Enables a different AutoVPN port for this uplink at the site level. The port is
used for the source and target ports for this uplink. The AutoVPN port can only be overridden for
SteelHead SD 570-SD, 770-SD, and 3070-SD, and SDI-2030 appliances. A use case for this setting is
if you have two high-availability (HA) appliances that have the same public IP. Tunnels with the two
HA appliances can’t be established, as they would appear identical. Overriding the AutoVPN port
ensures tunnels with the two HA appliances are using different ports and can be established.
Configuring AutoVPN on SteelHead SD
This section describes the procedures for configuring AutoVPN on SteelHead SD.
To configure AutoVPN on SteelHead SD
1. Choose Network Design > Uplinks page and select the appliance.
2. Click the AutoVPN tab.
Figure 5-1. Configuring the AutoVPN
3. Under AutoVPN priority, select one of these options:
– Don’t use this uplink for AutoVPN - Disables AutoVPN on this uplink.
– Low - Sets the uplink to the lowest priority.
– Normal - Sets the uplink to the normal priority.
– High - Sets the uplink to the high priority.
4. Click Submit .