![background image](http://html.mh-extra.com/html/riverbed/nic-lr/nic-lr_installation-manual_1465724065.webp)
Installing Network Cards in SteelHead GX and xx70, SteelHead SD, SteelCentral, Interceptor 9600, and SteelFusion Core 3500 | 65
Installing network add-on cards in 2U appliances
To test SteelHead NICs
1. Connect to the SteelHead CLI.
For detailed information, see the
Riverbed Command-Line Interface Reference Manual
.
2. Enter enable mode. At the system prompt, enter the following command:
amnesiac > enable
amnesiac #
3. Verify that the NIC is correctly installed.
For example, to verify the network cards on a SteelHead xx70, at the system prompt enter the
following command:
amnesiac # show hardware all
Hardware revision: A
Mainboard: Platform Tarpon 2UAGB Motherboard 2U 2.5 CI, 425-00270-01
Slot 0: .......... 2 Port Copper GigE Gen2 PCIe Non-Bypass Module, Integrated
Slot 1: .......... 4 Port Copper GigE Gen2 PCIe Network Bypass Card, 410-00115-01
Slot 2: .......... 2 Port SR Fiber 10 GigE Gen2 PCIe Redirector Card, 410-00302-03
Note:
Run the
in-path reset-iface
command in configuration mode to reset the main interface and recognize all
ports.
Installing network add-on cards in 2U appliances
This section describes how to install add-on cards in the 2U SteelHead GX, SteelHead CX xx70,
SteelCentral, and Interceptor 9600 appliances.
identifies the PCIe slot locations for the 2U appliances.
Figure 4-8. PCIe slot locations for 2U GX10000 and xx70 and 9600 appliances
Содержание NIC LR
Страница 8: ...8 Contents ...
Страница 16: ...16 Getting Started Troubleshooting ...
Страница 48: ...48 Installing Network Cards in xx80 Appliances Identifying interface names ...
Страница 106: ...106 Installing NICs in SteelHead xx50 Appliances Installing NICs in 3U xx50 appliances and Interceptor 9350 ...