Инструкция по установке
www.rival4x4.com
< Page 1
1
of 12 >
Installation manual
2
D.
270
1.1-NL
, 2
D.2702.1-NL
INSTALLATION PROCEDURE
2 .
9 Install aluminum bumper body onto
winch plate bracket. Attach it using two
screws M10x50 (pos.D) and washers
10 (pos.L).
Do not tighten yet.
If you are going to use winch,
please install fairlead (fairlead is not
supplied with the bumper).
30 Attach tow hooks (pos.5) to the
.
bumper using screws M10x30 (pos.C)
and washers 10 (pos.L).
Do not
tighten yet.
Aluminum bumper body installation on JK, JL, JT
31.
the lightbar and bumper to
Attach
brackets (pos.3,4) using screws M10x30
(pos.C) and washers 10 (pos.L).
32. Install skid plate (pos.8) on the
vehicle using screws M10x40 (pos.G)
and countersunk washers (pos.O).
Screw screws
№1
and
№2
in bracket
(pos.W), that needs to be installed from
the inside of the bumper (pos.1).
Screw screws
№3
in skid plate brackets
(pos.9,10 for JK) or (pos.11,12 for JL,
JT).
Tighten all hardware after that.
№1
№2
№3
Date: May 25, 2020
