Инструкция по установке
www.rival4x4.com
< Page
10
of 12 >
Installation manual
2
D.
270
1.1-NL
, 2
D.2702.1-NL
INSTALLATION PROCEDURE
2 .
5 Install LED lights to LED brackets
(pos.7).
LED lights are not supplied with
bumper.
2 .
6 Install LED lights from the inside of
the bumper. Fix it using screws M6x20
(pos.A), washer 6 (pos.K).
If you don’t have LED lights, install
the LED light cap (pos. Y) with screws
M6x20 (pos. A), washers 6 (pos. K),
LED brackets (pos.7).
Tighten
hardware
after that
.
Attach
wire to the bumper, using cable
tie (pos.S) and cable clips (pos.R).
For your convenience connect LED
wires with plug before aluminium
bumper body installation.
LED lights installation
For 2D.2701.1-NL full width bumper only
Lightbar installation
28 Attach it using screws M10x30
.
(pos
.
C), washers 10 (pos.L) and nuts
M10 (pos
.
I).
Tighten hardware after that
.
27 Install lightbar (pos.6) onto the
.
bumper (pos.1).
Date: May 25, 2020
