1946х473х457 mm
FRONT BUMPER
www.rival4x4.com
< Page 2 of 12 >
Installation manual
2
D.
270
1.1-NL
, 2
D.2702.1-NL
МОМЕНТ ЗАТЯЖКИ
РЕКОМЕНДАЦИИ ПО УСТАНОВКЕ
* Personal safety during the installation process must be adhered to at all times
.
* Estimated time for installation
:
2 hours
.
* The RIVAL Bumper must be mounted and affixed to the vehicle according to this installation manual and the use of
personal safety equipment is highly recommended
.
* Do not install this bumper on
vehicle
models other than those allowed in this manual.
* Check state and local highway safety laws regarding permitted bumper types and heights.
* If you bought the 2D.2701.1 bumper, please use this instruction to install the bumper then refer to the LED lights
installation guide.
* М6 - 9 N·m (6.6 lb/ft),
* М10 - 30 N·m (22.1 lb/ft),
* М12 - 77 N·m (56.8 lb/ft).
УСЛОВИЯ БЕЗОПАСНОГО ИСПОЛЬЗОВАНИЯ
* The RIVAL Bumper is designed to compliment the use and design of the specified vehicle under conditions specified
by the
vehicle
manufacturer.
* While driving the vehicle at any speed, collision with any other vehicle, animal or object must always be avoided.
* Following any collision with any other vehicle, animal or object, the RIVAL Bumper and the vehicle must be inspected
by a specialized or suitably qualified vehicle repairer for possible damage to the components and assemblies in order
to confirm suitability for further use of the vehicle.
* It is strongly recommended that you do not operate a vehicle with a damaged bumper or its components. In the case
of damage, please contact the nearest RIVAL dealer. Vehicle, or where the bumper has been damaged, is extremely
dangerous and must be avoided at all cost.
* The operation of a vehicle where the bumper is not properly attached and fastened to the vehicle, or where
the bumper has been damaged, is extremely dangerous and must be avoided at all cost.
* It is recommended that you carry out regular inspections of all the bumper elements such as all
bolts, wires,
connectors.
* A winch with a pull capacity of up to and including 12000 lb can be installed with the RIVAL Bumper. It is not advisable
to exceed this pulling capacity since damage, injury or death may occur where the 12000lb recommended capacity is
exceeded. The Rival bumper provides standard 4 1/2"x10" mounting holes.
SAFETY NOTICE
INSTALLATION NOTICE
REQUIRED TOOLS
TORQUE SETTING
*
Basic tool kit
* Torque wrench
*
Crosspoint and
f
lat head screwdriver
Date: May 25, 2020
2D.2701.1-NL
(
FULL WIDTH
)
JEEP WRANGLER JL 2018-
JEEP WRANGLER JK 2007
-
2018
JEEP GLADIATOR JT 2019-
Aluminum/Steel
76,6x18.6x18 inch
55 kg / 121,2 pound
Part Number
:
Suited to vehicle:
Material
:
Dimensions:
Weight
:
2D.2702.1-NL (STUBBY)
JEEP WRANGLER JL 2018-
JEEP
WRANGLER JK 2007
-
2018
JEEP
GLADIATOR JT 2019-
Aluminum/Steel
51x20.6x16 inch
49 kg / 108 pound
Part Number
:
Suited to vehicle
:
Material
:
Dimensions
:
Weight
:
1296х523х407 mm
